Asbestos & Non Asbestos Packing
Bearings
Battery Manufacturing
Tools
Material Handling Equipments
Fenner V Belts
Welding & Power Tools
Fenner Engineering Products
2bolt flange take-up insert
2bolt flange take-up insert
Pasting Belt TCT Saw Blade
Expander Socktry
Steel Wire Rope Chain Hoist Wire Rope Sling
Steel Wire Rope Chain Hoist Wire Rope Sling
Expander Socktry
Expander Expander Expander
 
Tools
Subscribe to our newsletter
See our news letters
Do you have a question?
Do not hesitate to contact us
via this form.
Call us at: 91-9903355771
Home Asbestos & Non Asbestos Packing Modulus Fibrous Plastic Packing
Offering 30 years of technical knowledge & experience
  Style 1700  
Service Recommendation

This is moudable loose packing manufactured out of tough selected High Grade long Asbestos Fibres blended with special lubricant and graphite throughout, of non-metallic composition. Suitable for superheated and High Pressure steam, Gases and Oils. Do not use against stainless steel rods strong acid & alkalies. Packs of 750 gms.

Temperature Centigrade 300

 
 
 
  Style 1710  
Service Recommendation

It is semi-metallic fibrous packing of asbestos fibre with metal shreds of antifriction white metal blended in the composition with special lubricants and graphited throughout. Recommended for similar use as style 1700, but under excessive high pressure and temperature. The packing has low frictional properties. Avoid using on Brass or soft Bronze rod surfaces. Do not use against stainless steel rods, strong acid & alkalies. Packs of 750 gms.

Temperature Centigrade 400

 
 
 
  Style 1715  
Service Recommendation

Long selected Asbestos Fibre specially processed with heat resisting rubber compound which vulcanizes on being heated. For packing grooves in steam cock. Packs of 200 gms.

Temperature Centigrade 400

 
 
 
  Style 1720  
Service Recommendation

Long selected Asbestos Fibre specially processed with rubber compound which does not vulcanise. For stuffing boxes of cocks and valves, water guages and boiler test cocks. Packs of 200 gms.

Temperature Centigrade 400

 
 
 
  Style 1750 SS  
Service Recommendation

For use against STAINLESS STEEL RODS. This is mouldable loose fibrous asbestos packing blended with special lubricants. For high temperature steam, hot and cold water, air and oil service in valves and centrifugal pumps. The loose packing can be tamped into stuffing box and when rammed hard into a gland, it will form a dense homogenous mass which is impervious to high temperature and pressure. It serves best when hardening or disintegration of bonding is objectionable. It remains responsive to gland compression and is easily adjusted by slight additions to overcome leakage if and when additional packing is required. Recommended for duty on worn-out and mal-aligned shafts. For best result seal with a ring turn of Champion Style 1850 Braided Packing both at beginning and end to prevent extrusion. Packs of 750 gms.

Temperature Centigrade 500