|
 |
|
 |
|
|
Speciliaty Performance Packing |
|
 |
|
ALL STYLES AVAILABLE INACCURATE RING FORM
Information on different products are based on general knowledge and experience is given and accepted at the buyers risk. Considering the wide range of applications concerning media, pressures, temperatures, shaft speeds, and human factors Involved. No warranty is given or implied with respect to given information. SPECIFICATIONS are subject to change without notice.
|
| |
Style 1 |
|
A PURE PTFE yarn packing with no additive or lubricants. The packing is resilient with low coefficient of friction, dimensional stability, with minimum frictional heat.
SERVICE RECOMMENDATION:
The packing is chemically inert. It is recommended for oxygen service and oxidising media, for PUMPS AND VALVES,MIXERS, agitators, CONCENTRATED acids, alkalies, aggressive vapours and gases. It can also be used in food industry.
NOT TO BE USED ON MOLTEN ALKALI METALS AND FLUORINE
Temperature : -200°C to +280°C
Pressure : Upto 400 Bar
PH : 0 to l4
|
|
 |
|
| |
| |
Style 2 |
|
The packing is manufactured from PURE PTFE yarn impregnated with PTFE dispersion by a special process. The packing has dimensional stability, high compressibility and low coefficient of friction.
SERVICE RECOMMENDATION:
For valve, reciprocating rods, centrifugal pumps, mixers, corrosive gases, acids and alkalies, ammonia, solvents, hydrocarbons, food stuff and pharmaceutical industries.
NOT TO BE USED AGAINST FLUORINE AND ALKALI METALS.
Temperature : -2I0°C to +280°C
Pressure : Max upto 500 Bar
PH : 0 to 14
|
|
 |
|
| |
| |
Style 3 |
|
This universal pump packing is manufactured from PTFE IMPREGNATED YARN, treated with high temperature resisting lubricant. The packing has compressibility, flexibility, dimensional stability, low coefficient of friction. Fluids can be sealed with minimum of gland pressure and heat built up.
SERVICE RECOMMENDATIONS:
A reliable packing for valves, agitators, rotary and reciprocating pumps in highly aggressive chemicals, corrosive liquids, concentrated acids, alkalies, oils, solvents, gases, pharmaceuticals, and foodstuff industries.
NOT RECOMMENDED FOR MOLTEN ALKALI METALS, FLUORINE GAS.
Temperature : - 200°C to + 280°C
Pressure : Upto 350 Bar
|
|
 |
|
| |
| |
Style 23 |
|
This packing, constructed from HIGH TENSILE STRENGTH PTFE yarn which incorporates high quality graphite particles for better heat transfer. The constituents impart improved thermal conductivity, heat dissipation, lubricity, low thermal expansion and low coefficient of friction.
SERVICE RECOMMENDATION:
The packing is developed for high speed shafts in rotating, reciprocatory and static services, valve stems, slurry and high pressure applications against chemicals, acids and alkalies, oils, pulp and paper etc.
NOT RECOMMENDED FOR fluorides, molten alkali metals,fuming nitric acid, ammonium nitrate, oxygen, or strong oxidising agents.
Temperature : -250°C to +300°C
Pressure : Upto 350 Bar
PH : Qto 14
|
|
 |
|
| |
| |
Style 38 |
|
A high purity carbon filament yarn packing having a good thermal conductivity, flexibility, resiliency, elasticity and low friction.
SERVICE RECOMMENDATION:
The packing is for high speed, high temperature and pressure applications in sealing Boiler feed pumps, super heat steam, agitators, mixers, digester, crytallizers, solvents, oils, non oxidising mineral acids and alkalies. It is a good valve stem packing.
NOT RECOMMENDED FOR fluorine, nitric acid, aqua regia and strong oxidsiers.
Temperature : -200°C to +600°C
Pressure : Upto 350 Bar
Ph : 1 to 14
|
|
 |
|
| |
| |
Style 166 |
|
A unique Duplex braided P.T.F.E. fibre and pure graphite combined packing. A first class multiservice packing in which wear resistance and dispersal of heat are intimately combined.
SERVICE RECOMMENDATION:
Widely used on pumps with high speed and temperature in CHEMICAL PLANTS, PHARMACEUTICALS, ALCOHOL, AGGRESSIVE GASES, PETROCHEMICALS, AND FOOD INDUSTRY.
Temperature : - 100°C to + 300° C
Pressure : 300 Bar
Ph : Oto 14
|
|
 |
|
| |
| |
Style 66 |
|
A 100% pure GRAPHITE YARN Packing impregnated with a Blocking Agent. GRAPHITE fibres do not harden or glaze at high temperature. With lubricating value of graphite, the packing is frictionless eliminating shaft wear. The packing has high heat conductivity, high temperature resistance and low co-efficient of expansion.
APPLICATION:
The packing has excellent chemical resistance. Applications include valves, centrifugal and rotary pumps, mixers, agitators, at high surface speeds, handling aggressive fluids such as acids, alkalies, oils, solvents, steam, hot tar and refinery services.
NOT RECOMMENDED FOR oxygen, oxidising environment, fuming nitric acid.
Temperature : -100°C to +650°C
Non oxidising environment : Upto 2700°C
Pressure : Upto 350 Bar
Ph : Oto 14
|
|
 |
|
| |
| |
Style 668 |
|
Pure 100% expanded Graphite packing. It is chemically inert, resilient and compactable, self lubricating with low frictional co-efficient and having high thermal conductivity.
APPLICATION:
An ideal packing for high pressure and temperature for pumps and valves in a wide range of service applications in most fluids including petrochemicals, refineries, thermal power stations, fertilizer plants, steel works, in steam hot oils, solvents, hydrocarbons, alkalies, acids and paper mills.
NOT RECOMMENDED FOR strong oxidising compounds, hot nitric acid, concentrated sulphuric acid, molten metals, alkali, aqua regia, petroleum.
Temperature : -200°C to+500°C
Inert, non oxidising environment : upto 3000°C
Pressure : Upto 300 Bar
Ph : Oto 14
|
|
 |
|
| |
| |
Style 172 |
|
The packing is a combination of tough high strength ARAMID fibre yarn on corners and PTFE lubricated yarn on the sides. The positioning of tough ARAMID yarn with negligible friction of PTFE Yarn renders the packing best suited for high pressure rotating and reciprocating applications. The packing constituents have very low thermal expansion, good dimensional stability and creep resistance under high pressure applications.
SERVICE RECOMMENDATIONS:
Best for sealing wide range of slurry and high pressure pumps, agitators, valves, mixers, in chemicals, acids, alkalies, most gases, petroleum fertilizers oils, steam, aromatic solvents, ammonia and CARBAMATE services
NOT RECOMMENDED FOR OXYGEN and oxidant alcohols. Preferred use against abrasive media in slurries, mixers and agitators.
Temperature : -200°C to + 280°C
Pressure : Upto 500 Bar
Ph : 2 to 12
|
|
 |
|
| |
| |
Style 174 |
|
This Abrasion resistant, inert packing is produced from tough high strength ARAMID fibre filament yarn with each strand fully impregnated with PTFE high temperature resisting lubricants. The packing has flexibility, resiliency, lubricity with excellent thermal and dimensional stability, treating the shaft gently.
SERVICE RECOMMENDATION:
For abrasive media and slurry applications in valves, mixers, agitators, rotary and reciprocatory applications in solvents, mild acids and alkalies, petrochemicals, paper and pulp, pharmaceuticals.
Temperature : -200°C to+300°C
Pressure Upto 280 Bar
Ph : 3 to 12
|
|
 |
|
| |
| |
Style 176 |
|
A combination to tough ARAMID fibre yarn in the corner and core strands and PTFE GRAPHITE yarn on the seam strands. This structure generates maximum resistance to extrusion; simultaneously the graphite PTFE yarn on the sides of the packing imparts thermal conductivity and lubricity for cooler shaft running.
SERVICE RECOMMENDATION:
Best for applications on abrasive fluids and slurries in centrifugal and reciprocating pump at high temperature and under high pressure for acids, alkalies, organic and inorganic solvents, chemicals, sewage water, oils, gases, paper and pulp mills.
Temperature : -200°C to+300°C
Pressure : Up to 500 Bar
Ph : 3 to 12
|
|
 |
|
| |
| |
Style 36 |
|
This versatile high performance packing is plaited from GRAPHITE FILLED PTFE YARN. Due to this unique combination this packing has high thermal conductivity, low coefficient of thermal expansion, lubricity, low friction, minimum shaft wear and universal chemical resistance. The packing is non hardening.
SERVICE RECOMMENDATIONS:
For centrifugal, rotary pumps, agitators, mixers and low pressure valves, handling chemicals, caustics, acids, solvents, dyes, white and black liquor, oils, pulp and paper, abrasive materials etc.
NOT RECOMMENDED FOR FLUORINE, STRONG OXIDSING AGENTS, FUMING NITRIC ACID, OLEUM, AQUA REGIA
Temperature : -212°C to+280°C
Pressure : Upto250Bar
Ph : O to 14
|
|
 |
|
| |
| |
Style 36 |
|
A cotton yarn packing as in STYLE 376 with Graphite impregnation as an added lubricant. The packing is resilient and flexible.
APPLICATION:
Rotary, reciprocating pumps, in ship building and domestic fresh water pumps.
Temperature : 130°C
Pressure : Upto 70 Bar
Ph : 6 to 8
|
|
 |
|
| |
| |
Style 2222 |
|
The packing is made from longline flax fibre yarn, square braided construction. The yarn is throughly impregnated during construction process with a non graphite lubricant and further surface treated with a special water resistant lubricant.
APPLICATION:
The packing is designed basically as hydraulic purpose pump packing, for cold water, sea water, river water in reciprocatory, rotary pumps as STERN GLANDS in shipping/marine industry.
Temperature : 130°C
Pressure Upto 200 Bar
Ph : 5 to 9
|
|
 |
|
| |
| |
Style 2224 |
|
Basically the packing is for Marine STERN GLANDS. Manufactured from long flax fibre yarn impregnated with PTFE and additional lubricant, specially blended for hydraulic applications, Combining strength firmness flexibility, lubricity and compressibility.
APPLICATION:
For rotary, reciprocating and static applications, in fresh & brine water in pumps, ram presses, accumulators, in paper mills, pharmaceuticals and foodstuff, stern tubes and RUDDER POST seals in marine and ship building and STERN GLANDS.
Temperature : 150°C
Pressure : Upto 240 Bar
Ph : 6 to 10
|
|
 |
|
| |
| |
Style 374 |
|
This hydraulic packing is braided from soft natural fibre cotton Yarn impregnated with high grade PTFE lubricant and additives. The packing has a low coefficient of friction, is resilient and flexible.
APPLICATION:
Basically the packing is designed for HYDRAULIC APPLICATION in low and medium pressure pumps and valves handling hot and cold water, condensates, air compressors, vacuum pumps and in thermal power plants.
Temperature : upto 150°C
Pressure : Upto 80 Bar
PH : 4 to 10
|
|
 |
|
| |
| |
Style 376 |
|
The packing is plaited from long staple cotton fibre yarn impregnated with high grade lubricants. The packing has resiliency and flexibility.
APPLICATION:
For high speed centrifugal and reciprocating pumps, condensate pumps, air compressors and refrigeration, ammonia, alcohol, water and hydraulic services.
Temperature : Upto 130°C
Pressure : Upto 80 Bar
PH : 6 to 8
|
|
 |
|
| |
|
| |
|
